Case Study: Meraki Tech Refresh Licensing, MR46 to CW9176I
Last updated: October 2026
This Meraki tech refresh licensing case study shows an office that replaced 30 MR46 access points with CW9176I access points on 6 floors. The hardware change was easy. The licensing was the problem. The original order specified LIC-MR-3Y licences. Under co-term, adding them would have removed cover from the other devices or created ghost inventory. We RMA'd the licence and renewed the full organisation on one date.
Megatron Technology is an authorised Cisco Networking Partner and Managed Services Provider in Singapore (est. 1990). This case study uses facts from our project records. We do not name the customer.
Who was the customer in this Meraki tech refresh case study?
Type: an office.
Site: 1 site with 30 access points across 6 floors.
Refresh: Meraki MR46 to Cisco CW9176I.
What was the challenge with Meraki tech refresh licensing?
The hardware was easy. The licensing was the challenge.
The original order specified LIC-MR-3Y licences. The customer's network uses Meraki co-term licensing. In co-term, these rules apply:
One shared date. All devices in the organisation share one co-term date.
A new licence changes the date. When you add a licence, the dashboard calculates the shared date again.
For this organisation, adding the LIC-MR-3Y licences would have caused one of two problems:
Lost cover. All the other devices could lose their licence cover.
Ghost inventory. The dashboard could show licences or devices that do not match the real network.
Read more in How Cisco Meraki Co-Term and Subscription Licensing Work.
What did we design and deploy?
We replaced the APs and fixed the licensing.
| Item | What we did | Why it matters to the customer |
|---|---|---|
| Hardware | 30 × CW9176I access points to replace 30 × MR46 | New APs on all 6 floors |
| PoE check | We checked the PoE requirements | The switches can power the new APs |
| Baseline heatmap | We ran a heatmap before the installation | A record of coverage before the change |
| Blind spots and AP positions | We checked for blind spots and for APs that needed to move | The new APs go in the correct positions |
| Licensing | We RMA'd the licence and renewed the full organisation | A clean organisation with one renewal date |
How did we do the MR46 to CW9176I hardware refresh?
PoE check. We checked the PoE requirements of the new APs.
Baseline heatmap. We ran a heatmap before the installation.
Blind spots. We checked for blind spots.
AP positions. We checked if any AP needed to move.
How did we fix the Meraki licence problem in the refresh?
We did not add the LIC-MR-3Y licences to the existing network. We did these two steps:
We RMA'd the licence.
We renewed the full organisation.
The full organisation now has one renewal. To see when you can move a licence to a new device, read Can I Reuse My Meraki Licence When I Replace an EOL Device?.
What was the outcome?
A clean organisation. The licences match the real network.
No ghost inventory. The dashboard shows only real devices and licences.
All devices remained licensed. No device lost its licence cover.
One renewal. The full organisation renews on one date.
New hardware. The full organisation enjoys the benefits of Wi-Fi 7.
What can other Meraki customers learn from this case study?
Check the licensing before you order. A licence that looks correct can cause problems in a co-term organisation.
Do not add licences without a check. Each new licence changes the shared co-term date.
Run a baseline heatmap. It gives you a record before the change.
Frequently asked questions
Why is licensing hard in a Meraki tech refresh?
In co-term, all devices share one date. Adding a licence changes that date. In this project, adding the ordered licences would have removed cover from other devices or created ghost inventory.
What is ghost inventory in Meraki?
Ghost inventory is a licence or device in the dashboard that does not match the real network.
How did you fix the licence problem?
We RMA'd the licence and renewed the full organisation. The organisation now has one renewal, and all devices kept their cover.
What do you check before an MR46 to CW9176I refresh?
We check the PoE requirements, run a baseline heatmap, check for blind spots and check if any AP must move.
Related: How Cisco Meraki Co-Term and Subscription Licensing Work · Can I Reuse My Meraki Licence When I Replace an EOL Device? · Cisco Meraki page
How do we plan Meraki tech refresh licensing?
Send us your current device list and your licence model before you order. We check the licensing and plan the refresh. Reach out to us for a quote if you need a price.
Megatron Technology Pte Ltd (est. 1990, UEN 199002644W) is an authorised Cisco Networking Partner and Managed Services Provider in Singapore, and a Fortinet reseller. Our in-house team of Cisco-certified engineers design, licence, procure, deploy and support Cisco Meraki, FortiGate and Cisco enterprise networks. Verify us on the Cisco Partner Locator. Contact: +65 6346 2001 · info@megatron.com.sg. See our Cisco Meraki page or contact us.